Products
KLINGER Top Sil ML1
Multi-layer sealing material with extended service life and improved elasticity at high temperatures. Excellent behavior in any application.
Composition and application:
A revolutionary combination of synthetic fibers and different elastomers connected in a multilayer structure. The outer layers contain HNBR filler, which ensures long-lasting elasticity, high temperature resistance, reduced brittleness, resistance to aging and oxidation. The middle layer contains NBR filler, which guarantees high density, strength, low creep under load and high allowable load. Suitable for use with oils, water, steam, gas, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants.
Certificates:
DIN-DVGW
DIN-DVGW W 270
Elastomer-Guideline
German Lloyd
SVGW approval
Technical data:
Compressibility ASTM F36 J: 9%
Recovery ASTM F 36 J min: 50%
Stress relaxation DIN 52913 ( 50 MPa 16h/300˚C): 28 MPa
KLINGER cold/hot compression 23˚ С: 8%
KLINGER cold/hot compression 300˚ С: 15%
Tightness DIN 28090-2: 0,05 mg/s.m
Thickness increase ASTM F 146 ( Oil JRM 903: 5h/150˚C): 4%
Thickness increase ASTM F 146 ( Fuel B: 5h/23˚C): 8%
Density: 1,7 g/cm3
Thickness: 2 mm
Non-stick coating of sealing materials:
All KLINGER Sil sealing materials have a special non-stick coating with low adhesiveness, which allows easy separation of the finished gaskets from the installation site. Graphite coatings are also made to order.
KLINGER Expert – A computer program supporting the selection of material, the size of standard fittings and the calculation of the bolt tightening moment. Translated into Bulgarian
Dimensions of the standard sheets:
1500 mm х 1500 mm (available on stock)
2000 mm х 1500 mm ( on request )
Thickness:
1 mm, 2 mm, 3 mm ( available on stock )
Other thicknesses (on request)
Production of ready-made garnishes:
POLIMAT Ltd. offers selection of the appropriate material depending on the parameters of the working environment and production of ready-made garnishes according to the customer’s specification.
