Products
Klinger Topgraph
Universal seal for high pressure and temperature with a wide range of application and good crush resistance. Suitable for steam and other high temperature fluids.
Composition and application:
Graphite and synthetic fibers bonded to NBR.
Resistant to hot water, steam, oils, hydrocarbons, gas and many other chemicals.
Certificates:
DIN-DVGW
DIN-DVGW W 270
Elastomer-Guideline
German Lloyd
SVGW approval
Technical data:
Compressibility ASTM F36 J: 10%
Recovery ASTM F 36 J min: 60%
Stress relaxation DIN 52913 ( 50 MPa 16h/300˚C): 27 MPa
KLINGER cold/hot compression 23˚ С: 10%
KLINGER cold/hot compression 300˚ С: 10%
Tightness DIN 28090-2: 0,05 mg/s.m
Thickness increase ASTM F 146 ( Oil JRM 903: 5h/150˚C): 5%
Thickness increase ASTM F 146 ( Fuel B: 5h/23˚C): 7%
Density: 1,8 g/cm3
Thickness: 2 mm
Non-stick coating of sealing materials:
All KLINGER Sil sealing materials have a special non-stick coating with low adhesiveness, which allows easy separation of the finished gaskets from the installation site. Graphite coatings are also made to order.
KLINGER Expert – A computer program supporting the selection of material, the size of standard fittings and the calculation of the bolt tightening moment. Translated into Bulgarian
Dimensions of the standard sheets:
1500 mm х 1500 mm (available on stock)
2000 mm х 1500 mm ( on request )
Thickness:
1 mm, 2 mm, 3 mm ( available on stock )
Other thicknesses (on request)
Production of ready-made garnishes:
POLIMAT Ltd. offers selection of the appropriate material depending on the parameters of the working environment and production of ready-made garnishes according to the customer’s specification.
