Products

Packing for valves and pump

Klinger Packing for valves and pump
Klinger manufactures a wide range of packings for valves and pumps that are suitable for a variety of environments and working conditions.

Composition and application:
Klinger manufactures packings from aramid fibers, graphite, Teflon, inconel reinforcement, lubricants, glass fibers, etc., as well as combinations of these materials.
They are suitable for large temperature amplitudes (from -240 to 650°C), various chemicals, high pressure and speed (for pumps) for applications in the chemical industry, power plants, distilleries and breweries, refineries, boilers, paper and pulp production, mines , quarries, gas environment, ball mills, etc.

Dimensions:
Section: from 3 mm x 25 mm
Length: 8 meters in box

Weight:
Under 9.5mm 1kg/box
9.5mm to 12.5mm 2kg/carton
Over 12.5mm 4kg/box

Delivery:
We have the following gaskets in stock:

K3222W – fittings for packings and pumps made of graphite and inconel reinforcement; suitable for steam, acid and alkaline environments; the product has an unlimited shelf life and is environmentally friendly. Technical information attached.
Sections: 6x6mm, 8x8mm, 9.5×9.5mm, 11x11mm

K4322 – fittings for packings and pumps made of Teflon and graphite lubricant; suitable for chemical applications. Technical information attached.
Sections: 8x8mm, 10x10mm

Technical recommendations:
If you require further technical information or would like to receive advice from Klinger on a specific matter, please contact us at the addresses indicated. For better service, please be prepared to answer questions about:

  1. Type of fitting or pump
  2. Working and test pressure
  3. Temperature – constant or variable
  4. Pressure and temperature cycling
  5. Environment and concentration
  6. Operational speed
  7. Special requirements
  8. Specific packaging conditions.

Packing extractors:
We also offer extractors for fillings of different thicknesses. One set consists of two packing extractors, two extractors are required to extract a packing.

Available in stock:

  1. Extractor No. 1 /for packing 6.5 – 9.5 mm/
  2. Extractor No. 2 /for packing 9.5 – 12.5 mm/
  3. Extractor No. 3 /for packing 12.5 – 16.0 mm/

Datasheet K3222W
Datasheet K4322
Datasheet KLINGER Packing Tools

English